Analysis of anions by solid-state spot-tests

Trituration and capillary solid-state spot-tests for 25 anions with a number of organic and inorganic reagents have been examined. A comparative study of the corresponding reactions in solution has also been made. Incorporation of a glass-wool plug in the capillary improves the selectivity. Schemes are presented for possible use of the technique.     

Construction of solid-liquid phase diagrams in ternary systems by titration calorimetry

Titration calorimetry was used to construct the solid-liquid equilibrium line in ternary systems containing the solute and an aqueous mixed solvent by measuring the heat of dissolution of the solid solute during successive additions of the liquid solvent. The plot of cumulated heats versus the mole ratio, n_solvent/n_solute, yields two (almost) linear increases of different slopes. These two lines represent successively the enthalpy of dissolution then the enthalpy of dilution of the medium; their intersection gives the solubility and the enthalpy of dissolution of the solute. Phase diagrams have been established over the whole concentration range for o-anisaldehyde, 1,3,5-trimethoxybenzene and vanillin, in water + methanol, +ethanol, or +n-propanol at 303, 313 and 318 K.     

A Method for the Acetylation of Alcohols Catalyzed by Heteropolyoxometallates

Summary. Esterifications of acetic acid with some linear, secondary, tertiary, and benzylic alcohols mediated by catalytic amounts of Keggin, Wells–Dawson, and Preyssler type heteropolyacids were carried out under reflux at mild reaction conditions with good to excellent yields. Among the examined catalysts, H₃PW₁₂O₄₀ and H₁₄NaP₅W₃₀O₁₁₀ revealed better results than other heteropolyacids. This work was performed with the aim of simplifying the esterification process by omitting any solvents and mineral acid catalysts. Easy work-up, low cost, and acidic waste reduction, which are all important features from the environmental and economical points of view, are distinct aspects of this protocol. Heteropolyacid catalysts could be separated after a simple work-up and reused for several times.     

Water as an Efficient Solvent for Oxygenation Transformations with 34% Hydrogen Peroxide Catalyzed by some Heteropolyoxometalates

Summary. A highly efficient, selective, fast, and cheap protocol is developed for oxidation of aromatic amines and alcohols utilizing 34% hydrogen peroxide in water catalyzed by some W- and Mo-based heteropolyoxometalates. Findings showed that dodecatungstophosphoric acid, H₃PW₁₂O₄₀, was the most efficient catalyst in the examined oxidation reactions. This methodology may prove to be a valuable alternative for eco-friendly green oxidation. Inherent simplicity, easy work up, and using regenerable catalysts were other key aspects of this oxidation protocol.     

Headspace solvent microextraction of trihalomethane compounds into a single drop

Headspace solvent microextraction (HSME) into a single drop is developed for the determination of six trihalomethanes, CH2Cl2, CHCl3, C4H9Cl, CCl4, C2HCl3, and C2Cl4, in aqueous solution. A drop of benzyl alcohol containing bromoform, as an internal standard, is used for extraction. The analytes are extracted by suspending a 3-microL drop directly from the needle of a microsyringe. The needle passes through the septum of a vessel, and the needle tip appears above the surface of the solution. After the prescribed extraction time, the drop is drawn back into the syringe. The syringe is then removed, and its content is injected directly into a gas chromatography column for analysis. The main parameters affecting the HSME process, such as stirring speed, microdrop volume, sample solution temperature, microsyringe needle temperature, sample volume, solution pH, extracting solvent, and ionic strength of the solution, are studied. Also, the linear range and precision of the method are examined.     

以金属硫酸氢盐为催化剂在无溶剂条件下高效合成3,4-二氢嘧啶-2(1H)-酮

以金属硫酸氢盐M(HSO4)n(Ca(HSO4)2,Zn(HSO4)2和过硫酸氢钾制剂oxone○R)为催化剂催化醛、1,3-二羰基化合物和尿素进行缩合反应,在90℃及无溶剂的条件下高收率、一锅法合成了3,4-二氢嘧啶-2(1H)-酮.     

SnCl4 and SbCl5 promoted aromatization of enamines

Aromatic amines have been synthesized efficiently from enamines using SnCl₄ and SbCl₅ in CH₂Cl₂ at room temperature.     

ZrO2催化无溶剂条件下醇的液相氧化反应

采用一种环境友好的方法,以分子氧为氧化剂,以ZrO2为催化剂,在无溶剂的条件下实现了醇的选择性氧化.苯甲醛、环己酮和辛醛等是相应醇的主要氧化产物.考察了不同反应条件(搅拌速度、反应时间和温度)、催化剂制备参数(焙烧温度和负载量)及氧分压等的影响.结果发现,对于醇氧化生成相应羰基化合物,1 223 K焙烧的ZrO2比723 K焙烧的ZrO2显示出更高的催化活性.催化剂在反应混合物中不溶解,可以通过简单的过滤使其分离并重复使用.当搅拌速度大于900 r/min时,对醇的转化速率无明显的影响.     

A simple one-pot procedure for the direct conversion of alcohols into azides using TsIm

A facile and efficient method for one-pot conversion of alcohols into azides using N-(p-toluenesulfonyl)imidazole (TsIm) is described. In this method, alcohols are refluxed with a mixture of NaN₃, TsIm and triethylamine in the presence of catalytic amounts of tetra-n-butylammonium iodide (TBAI) in DMF affording the corresponding alkyl azides in good yields. This methodology is highly efficient for various structurally diverse alcohols with selectivity for ROH: 1° > 2° > 3°.     

Energetic and topological analysis of the reaction of Mo and Mo2 with NH3, C2H2, and C2H4 molecules

The Density functional theory has been applied to characterize the structural features of Mo(1,2)-NH(3),-C(2)H(4), and -C(2)H(2) compounds. Coordination modes, geometrical structures, and binding energies have been calculated for several spin multiplets. It has been shown that in contrast to the conserved spin cases (Mo(1,2)-NH(3)), the interaction between Mo (or Mo(2)) and C(2)H(4) (or C(2)H(2)) are the low-spin (Mo-C(2)H(4) and -C(2)H(2)) and high-spin (Mo(2)-C(2)H(4) and -C(2)H(2)) complexes. In the ground state of Mo(1,2)-C(2)H(4) and -C(2)H(2), the metal-center always reacts with the C-C center. The spontaneous formation of the global minima is found to be possible due to the crossing between the potential energy surfaces (ground and excited states with respect to the metallic center). The bonding characterization has been performed using the topological analysis of the Electron Localization Function. It has been shown that the most stable electronic structure for a pi-acceptor ligand correlates with a maximum charge transfer from the metal center to the C-C bond of the unsaturated hydrocarbons, resulting in the formation of two new basins located on the carbon atoms (away from hydrogen atoms) and the reduction of the number of attractors of the C-C basin. The interaction between Mo(1,2) and C(2)H(4) (or C(2)H(2)) should be considered as a chemical reaction, which causes the multiplicity change. Contrarily, there is no charge transfer between Mo(1,2) and NH(3), and the partners are bound by an electrostatic interaction.